Get your English Storybook close to perfect in just seven tricks

Get your English Storybook close to "perfect" in just seven tricks

While there is no "perfect" print in the world, the seven tips below may help you achieve a near-perfect English Storybook.

1. If your print uses a spread design, it means that the image or text on one page will span to the next signature. At this time, it is best to first make sure that the paper guides and grippers are in place. location in the factory, and then place the material as close to that area as possible. Also, try not to split a text into two sections for printing.

2. Always maintain 1/16 inch (jobs requiring simple cutting) or 1/8 inch (other jobs) bleed. Any image that exceeds the crop line must leave a certain margin (usually 3 mm) outside the crop line, so that people can correct the slight misregistration when trimming and cutting. This margin is called bleeding. Therefore, when cutting a stack of pages, appropriately increasing the bleed can improve the cutting quality of the entire job.

3. If the print file you send needs to be die-cut, it is best to store the die-cut line in a separate layer. This allows the printer to turn off this layer in the file before printing. Also, if you get proofs already printed with die lines, be sure to let your printer know that these lines do not need to be printed. It sounds simple, but many people can't do it.

https://www.minongpackaging.com/books/english-storybook.html

4. First of all, it is necessary to determine whether the paper you choose can achieve the ideal printing effect. Some papers may be too thick for multiple folds; some papers may not be suitable for UV coating, some papers may take many days to dry completely, and some papers can only be water-based coating, otherwise they will be stapled Equipment damage.

5. When designing a multi-page document that is intended for saddle stitching, be sure to take into account the fact that the inner pages of the book or the book are moved and separated from the spine during production, because the more pages, the higher the thickness of the spine, the easier it is. this circumstance occurs. To avoid jagged text and images on the inner pages caused by this situation, it is best to gradually shorten the gutter margins of each page, starting with the outermost pages.

6. When you submit a printing order for the printing house, it is best to include a printed product and written instructions. If your records do not indicate the number of pages of the product, do so on your samples. Give the written instructions to your colleagues to read, and let them help you find the areas that are not easy to understand.

7. When you are still in the conception stage, you should get in touch with the bookbinder and let them know what you are thinking. Not only can they help you achieve your goals, but they can also give you lots of cost-saving suggestions.

If you ignore this step, many simple tasks that can be done on high-speed equipment may need to be done manually by people, which will not only delay production time, but also increase production costs. In addition, by communicating with the bookbinder, you can let more people know and like your work.