High risk technology of double sided hot stamping for customized e-cigarette packaging box

Double sided hot stamping, in fact, many businesses who want to customize e-cigarette packaging box have provided us with the demand of double-sided hot stamping, but when we see the design draft, we will be told that it is not impossible to customize e-cigarette packaging box by double-sided hot stamping, but this practice is a great test of the quality of materials, you know, many custom-made e-cigarette packaging box manufacturers Home, in order to save costs, the material and mounting paper will be reduced standards, and these lowered standards will make the compression collapse in the heat transfer printing, the most direct result is that the hot stamping place is very fragile, it is easy to deform, and the effect of hot stamping is not necessarily strong, especially in the double-sided overlap place, it is very easy to get out Now there are some similar cases

However, as long as we avoid using the same sheet of paper on both sides when customizing the e-cigarette packaging box, we can greatly reduce this risk. However, there are still other risks, that is, when hot stamping the other side, due to extrusion, the other side is slightly prominent. I believe many friends who have seen the paper surface of gold and silver stamping and touched it will find that it is There is an obvious feeling of depression. This is caused by heat transfer extrusion. If this extrusion only appears on one side, the other side will not change much when it is carried out by machine. However, if it is double-sided hot stamping, if one side has been hot stamping, if it is reversed, because the front side has depression hot stamping, the other side will be hot stamping At the same time, it is likely to squeeze to the original concave hot stamping surface, leading to problems

I believe many small partners have heard it a little misty. In fact, when customizing the e-cigarette packaging box, the first step is to hot stamp the a side. The hot stamping part of the a side will sink, and then hot stamp the B side. However, when turning over, although the a side is not directly squeezed, if the B side has a hot stamping position that coincides with the a side, the extrusion of the B side will make the a side press itself Trapped position, re extrusion back, there will be a side hot stamping part off, or the packaging box customized paper material becomes fragile