Tipping Tpaper Silver Foil Top 10 issues for pre-press designers and printers to be aware of

Tipping Tpaper Silver Foil Top 10 issues for pre-press designers and printers to be aware of

Pre-press technology is really important, if we do not deal with pre-press problems, we will not be able to print high-quality printing products, the author here for you to sum up ten pre-press to pay attention to the problem.

The layout of copywriting and effective content should be more than 3MM away from the cutting line, so as not to cut the text.

The design of the document should be the text of the manuscript into a curve, so as to avoid the output of the plate because of unable to find the type and lost text or garbled code.

Please do not use system words when entering text, which will cause white nodes in the interleaved strokes. Turn the font into a curve and enlarge it. If there are white nodes in the interlacing of the strokes of the text, it means that this font is a systematic font or not suitable for printing, and other fonts need to be used.

Avoid text printing after typing in PHOTOSHOP and bitmap software, bitmap text printing will appear different degrees of blur.

The wire frame thickness of all input or self-drawn lines and color blocks shall not be less than 0.1mm, otherwise the printed product may be broken or unable to be presented.

The "edge width" cannot be set for any gradient object. Due to the different interpretation of the CTP publishing system, the gradient edge will be under-colored.

Images that are not properly processed or incorrectly formatted can cause image loss. RGB images or other non-CMYK 32-bit images less than 300DPI can cause discoloration and blurring. When using frame precision clipping, check whether it is locked to frame precision clipping, such as not locked. Precisely crop all objects in the lost picture box.

In Coreldraw9, rotating when applying a gradient to a composition can easily cause the gradient layer to be oriented incorrectly. Applied to the interactive effect (such as: stereo effect, shadow effect), in the version compatibility and rotation is easy to lead to the effect out of position, loss. Please separate the effect after finishing the effect and turn the lattice diagram again. (Warm tip: If the shadow effect is based on the above color, please modify the single black filling color of the shadow, such as: the base map is yellow, add an appropriate amount of yellow in the black effect, C=0, Y=80, M=0, K=100, which can solve the effect of gray layer, affecting the quality. When using the gradient effect: single color gradient to black, change the single black filling color, such as: magenta to black gradient, change the black to: C=0, Y=0, M=100, K=100, this can solve the gradient effect in the gradient layer gray layer, affect the quality.)

These are all pre-press design to pay attention to the problem, do these ten points we print a lot of smooth, the opportunity to make mistakes is less.