Craft Name of Paper Gift Box

Craft Name of Paper Gift Box

The process design of the gift box starts with material application, glue selection, operation steps, process control, and quality inspection. Each link is inseparable from a meticulous process arrangement. In the process description, in addition to the pre-production process design, the process name should be expressed The accuracy of the terminology is particularly important. Inaccurate descriptions have many impacts on subsequent production. Therefore, the accurate and standardized application of terminology can guide the orderly progress of the manufacturing process.

The term name of the process is:

3.4.1. Long side: the longest side of the rectangular box.

3.4.2. Short side: the shortest side of the rectangular box.

3.4.3. Anti-heaven and earth cover: According to the structure of the heaven and earth cover box, or the inner liner box made of the cover box or the bottom box, it is embedded in the box body to fix the contents or increase the space.

3.4.4. Laying seam: leave a certain distance between the gray board and the gray board to make it easy to bend the shell after the pasting.

3.4.5. Nail position: A semi-crescent-shaped notch is die-cut at the edge of the box body to facilitate opening.

3.4.6. Sewing line: Paste a piece of gray-bottomed white cardboard on the inner side of the PU leather, and sew along the edges with a sewing machine to combine them together. After the pasting is completed, you can see that there is evenness at the corners of the box Of sewing thread segments.

3.4.7. A perimeter: Use a strip of wrapping material to paste the perimeter of the insert or the box.

3.4.8. Three-sided enclosure: use a piece of wrapping material for the inner box, and paste the front and two sides of the box without pasting the back.

3.4.9. Back connection: paste a back sticker on the back of the cover box and the bottom box to connect the upper and lower boxes together.

3.4.10. Pre-folding: For some papers with higher gram weight, the mark line should be pre-folded once after die cutting, and then formed.

3.4.11. Drying: the process of drying the finished product in an open space with convection ventilation.

3.4.12. Magnet hole: In order to keep the surface of the gray board and the magnet surface in a plane, the part equivalent to the thickness of the magnet is removed from the surface of the gray board to form a circular or rectangular depression.

3.4.13. Mouth: the edge of the box.

3.4.14. Slotting on four sides: Along the four sides of the cut or die-cut gray board card, a V-shaped slot is opened according to the design distance, and the angle is 90 degrees after forming.

3.4.15. Coating oil: Generally, after the leather box is made, the exposed leather edges are painted with the same color to make the surface color consistent with the edge color.

3.4.16. Opening time: When the adhesive is applied to the carrier, there is a time period for complete solidification. During the effective time, the adhesion is the best. If the effective time is exceeded, the performance will gradually decrease and affect the adhesion effect.

3.4.17. Mould: A tool used for positioning or supporting during the production process. The shape and structure of the tool depend on product requirements.

3.4.18. Scraper: A tool used for scraping when pasting, and its shape is also inconsistent in different parts.

3.4.19. Hardware: metal parts used in combination of components.

3.4.20. Wooden box blank: a box blank made of MDF.