Process name of paper gift box

Process name of paper gift box

    The pasting process is composed of different processes. Each process is different in simplicity and operation. However, each process is of great significance. No matter which link has problems, it can affect the quality of the product. Therefore, every part of the process The process is very important. The term name of the process is;

3.2.1. Paper mounting: the process of die-cutting the printed surface, gluing through the glue machine, and then pasting onto the carrier.

3.2.2. Gluing: The process of applying glue to the package material with a glue machine.

3.2.3. Shaping: Pick up the die-cut or slotted gray board on the four sides and paste the four corners with tape to make it into a three-dimensional shape, and then paste it.

3.2.4. Pressure foaming: Put the pasted box into the mold, apply pressure to the four sides and one plane at the same time, so that the packaging material and the gray board are fully bonded to ensure that the product is flat and tight.

3.2.5. Inner mounting: After finishing the external pasting of the box, the inner circumference or inner bottom of the box needs to be pasted, most of which are pasted on the inner circumference and bottom of the box.

3.2.6. Tape: Use hand or machine to stick tape on the four corners of the die-cut and slotted gray board.

3.2.7. Waste removal: die-cut gray boards, cardboard or other materials, and remove the corners outside the finished product.