How Do I Adjust The Humidity Of The Spiral Notebook With Dividers Printing Paper

How do I adjust the humidity of the Spiral Notebook With Dividers printing paper

The printing press is very sensitive to paper. If the temperature and humidity are not well controlled, the paper will easily produce peelings, which will affect the Spiral Notebook With Dividers in printing and overprinting.

Before the machine in normal printing, paper, gauge, gauge, feed system and rules before detection system cooperate closely, but because of paper or adjust the failure to make a few or even a dozen pieces of paper into the impression cylinder and rubber roller between caused a sudden stop, known as stuffy car, stuffy car lethal effects on the printing opportunities, so need to cause the attention of the printer.

The main reasons for the stuffy car are: first, the gap is not adjusted well, including between the paper feed head and the paper feed plate, between the paper feed roller and the paper feed roller of the mechanical double-sheet controller. The front end of the feeding table is not suitable to adjust the height of the pressed paper, generally for the thickness of 3 printing paper. Or ultrasonic double controller and swing rod mechanism failure, resulting in more than two pieces. Second, paper adhesion makes several sheets of paper at the same time sucked up for transport, the reason is the printing ink layer is too thick or paper deformation. The third is the accident of car congestion. When the printing press is working normally, if the paper arrives before the gauge is early, late, skewed, missing Angle, rolled edge, and lack of paper, the photoelectric detection immediately orders the gauge to stop swinging, so as to prevent the paper from entering the roller again. At the same time, the oscillating paper delivery teeth open teeth and do not carry paper, the machine decelerates, the roller leaves the pressure, the plate ink roller lifts, the water transfer roller, the ink roller stops swinging. If the electrical control line failure is easy to roll a stack of paper into the stamping drum and rubber drum, there will be a stuffy car accident.

Therefore, the printing enterprise must have a special paper library, so that the temperature and humidity of the storage place is close to the printing workshop, such paper after cutting on the machine printing, printing quality has little impact, can ensure smooth paper feeding.