OEM Cheap Binding Notepad Several Kinds Of Typesetting And Folding Methods For Non-whole Book Notes

OEM Cheap Binding Notepad Several kinds of typesetting and folding methods for non-whole book notes

We often focus on the number of pages in a book, the way it is folded, the process of making it into a book, but rarely think about how many full sheets of paper it is made up of or how the pages are arranged. Determine the page number of the book related to print, it is the premise of the whole process setting. With it, we know how to print, print, bind and form books.

One print on one side of a full sheet or one print on both sides of a split sheet. A book consists of multiple sheets, which can be printed with multiple page numbers according to different folios. For example, if a sheet is printed with 8 page numbers, and the length of the row is 64 pages (multiples of 8), 8 whole sheets are needed, which is the case that the row can be full. If the content of the book is only 60 pages, how to arrange the blank page post and page number setting. How to arrange books if double-sided white pages appear?

The following folio printing press, 32 folio, vertical cross folding, binding books as an example, positive and negative page numbers set as follows.

(1) If the book page number is a multiple of 32, such as 128 pages, 256 pages...... Typeset directly according to the page number above.

(2) If the book has 33 pages of word content, except the 32 pages of the whole sheet, the remaining 33 pages of film is processed independently, glued to the large film and then exposed, the actual process only to 8 open (i.e. 0.25 printing), and then cover exposure 4 times, that is, the entire folier.

(3) If the book has word content 42 pages. Remove the 32 pages of the whole sheet, there are 10 codes remaining, 10÷32=0.3125, then we need to add the white pages into 12 codes, 12÷32=0.375, then spell 0.25 sheets, that is, 8 pages, 0.25×32=8, 0.375-0.25=0.125, the remaining 0.125 sheets, 0.125×32=4, Print the last 4 page numbers (including one double-sided white page). Pages 1 to 32 are on one panel, pages 33 to 40 are on another, pages 41 to 42 and a white page are on a third panel. Finally, they are printed separately, and then glued to pages, cover pages or inserts.

(4) If the book has 50 pages of word content, in addition to the 32 pages of the whole sheet, there are 18 pages, 16 pages with 0.5 sheets, two exposures to the whole sheet, because the page content is repeated once, a PS version can be printed out two copies of the book. Therefore, the layout of non - integral book post is essentially a step - by - step process.

In addition, in the actual production, in order to ensure that the page is not taken off, the page is usually not the whole sheet, the single sheet is sandwiched in the whole sheet binding, a whole sheet is not a continuous page number (1 ~ 32), but the spacing of an area of the page number for the single code insert.

Of course, when special page numbers appear, we can use other special folding methods, such as parallel folding, mixed folding. Take parallel folding core folding as an example, it is required by the page number order, the first folded edge of the paper in the middle, often used for 6 pages, 10 pages. Mixed folding is a folding method with both parallel folding and vertical cross folding, both turning and rolling folding. It is often used for 6 pages, 9 pages and double folding.